Retro gaming, done properly

|Jonah Reyes
A white Analogue 3D console and a white wireless controller on a seamless pale grey surface in soft studio light

The games of the cartridge era were made for hardware and televisions that no longer sit in most living rooms. Plug an original console into a modern flat screen and the result is often disappointing: modern TVs were not designed for the low-resolution analog signals those machines send out, and many handle them poorly, softening the picture and adding a delay between your thumb and the screen.

Doing retro properly comes down to three things: hardware that behaves like the original, the original games themselves, and a picture that respects how they were meant to look. Here is how each works, and where Analogue's consoles fit.

What an FPGA is

An FPGA, or field-programmable gate array, is a chip made of a large grid of logic blocks whose connections can be configured after the chip is made. Engineers describe a circuit in a hardware description language, and the FPGA is configured to become that circuit.

For a retro console, that means recreating the behaviour of the original machine's chips, its processor, graphics and sound, as logic on the FPGA. The result is not the original silicon, but a new piece of hardware designed to act like it.

FPGA or software emulation?

A software emulator is a program running on a general-purpose processor that imitates the original hardware step by step. Good emulators can be remarkably faithful, but they run on top of an operating system and have to sequence work that the original chips did all at once.

On an FPGA, the recreated circuits run in parallel, as the original chips did. That makes it easier to match the original timing and to keep input latency low. It is worth being clear about one thing: an FPGA console is only as accurate as the engineering inside it. When Analogue says its consoles involve "no emulation," it means they are not built on software emulation; Analogue's own wording for the Duo is that it is "not designed using software emulation."

A black Analogue 3D with an original Nintendo 64 cartridge seated in its slot, a black controller and more cartridges laid beside it on pale grey

Why the cartridge still matters

Analogue's consoles are built around original media. Each has an original-style cartridge slot, and the Analogue 3D's specifications state plainly that it does not play ROM files. Everything in this guide is about playing the cartridges and discs themselves.

There is a quiet pleasure in that. A shelf of cartridges is a library you can see, lend and hand down, and the games boot the way they always did. If a cartridge is reluctant to start, the usual remedy is gentle: a cotton swab lightly dampened with isopropyl alcohol across the contacts, then time to dry fully before it goes back in the slot.

Analogue 3D: the Nintendo 64, in 4K

The Analogue 3D is a Nintendo 64 re-engineered entirely in FPGA. It plays original N64 cartridges, is region free, and outputs over HDMI at up to 4K, with 1080p supported too.

  • Original controllers. Four original-style controller ports accept N64 controllers and accessories, and Bluetooth is built in for wireless controllers.
  • Built-in paks. Analogue lists a built-in Expansion Pak and Controller Pak among its specifications.
  • Original Display Modes. CRT, PVM and BVM modes recreate the look of the televisions and studio monitors these games were first seen on. Analogue notes that these modes need a 4K-capable display.

Its shape is a quiet nod to the original, in black or white, and it looks at home on a low media cabinet rather than hidden inside one.

Analogue Pocket: the Game Boy family, reimagined

The Analogue Pocket is a handheld engineered in two FPGAs that plays original Game Boy, Game Boy Color and Game Boy Advance cartridges. Its 3.5-inch, 1600 x 1440 LCD works out to 615 pixels per inch, under Gorilla Glass.

  • Original Display Modes recreate the look of the original GB, GBC and GBA screens, down to backlight effects, pixel grids and subpixel patterns.
  • Cartridge adapters, sold separately, add Game Gear, Neo Geo Pocket and Neo Geo Pocket Color, Atari Lynx, and TurboGrafx-16, PC Engine and SuperGrafx cards.
  • The Dock, also sold separately, sends the Pocket to a television over HDMI at 1080p and supports wireless and wired controllers for up to four players.
  • Nanoloop, a synthesizer and sequencer, is built in, and the Pocket keeps an original-style link port.

Analogue has also opened the hardware to third-party developers through what it calls openFPGA.

A black Analogue Pocket standing in its Dock with an original Game Boy cartridge loaded in the back, seen from a high three-quarter angle on a pale background

Analogue Duo: the cult NEC library

The Analogue Duo is built with FPGA for nearly every NEC format: TurboGrafx-16, PC Engine and SuperGrafx cards, plus the CD-ROM², Super CD-ROM² and Arcade CD-ROM² discs. It has an original-style HuCard slot and a built-in CD-ROM drive, so the whole library runs from one black case.

It is region free and outputs over HDMI at 1080p, 720p or 480p, with scanline and scaler options. Bluetooth and 2.4 GHz wireless are built in for up to five players without a receiver, and there is an original-style PC Engine controller port and two USB ports for wired controllers.

At a glance

Console Plays Picture
Analogue 3D Original N64 cartridges HDMI up to 4K; CRT, PVM and BVM modes
Analogue Pocket Game Boy, Game Boy Color and Game Boy Advance cartridges; more with adapters Built-in 3.5-inch screen; 1080p to a TV with the Dock
Analogue Duo TurboGrafx-16, PC Engine and SuperGrafx cards, NEC CD formats HDMI at 1080p, 720p or 480p; scanline options

Getting the picture right

These games were drawn for screens that blurred pixels together slightly and drew visible lines across the image. That is why the display modes matter more than they first appear to. Start with a clean, sharp picture to see the artwork as it was made, then try a CRT or scanline mode in the evening, when the room is dim and the effect feels most natural.

Two settings on the television help as much as anything on the console. Turn on the TV's game mode, which on most sets reduces the image processing that adds delay, and make sure motion smoothing is off. If the console sits in a living room, our guide to smart lighting that looks good covers soft, low light that flatters a screen at night.

The black Analogue Duo seen from directly above, its ridged lid and HuCard slot on a pale background

Which to choose

  • For the four-player living-room classics: Analogue 3D.
  • For a handheld you will carry every day: Analogue Pocket, with the Dock if you also want it on the television.
  • For a collector of NEC cards and discs: Analogue Duo.

Whichever you choose, the cartridges you already own come with you. You can see all three consoles, and everything else we carry for play, in the gaming collection.