The band is the part of a watch you actually touch all day. It decides whether the watch is comfortable at night, whether the heart sensor stays in contact during a run, and whether the same watch can go from a trail in the morning to a dinner in the evening. The case, meanwhile, carries the glass, the seals and the sensors that make it all work.
A little knowledge about both goes a long way. Here is how bands attach, which materials suit which days, and how to clean and look after a smartwatch so it keeps working as it should.
How bands attach
There are three broad systems, and they decide which bands you can use.
- Apple's slide-in slots. Hold the band release button and slide the band across to remove it; slide the new one in until it clicks. Apple's sizing rules are simple: bands for 46 mm cases fit 44, 45 and 46 mm cases, and bands for 44 to 46 mm cases also fit the 49 mm Apple Watch Ultra 4. The Ultra's own Trail Loop, Alpine Loop and Ocean Band are designed for it, and Apple says smaller bands on an Ultra should be kept for casual, everyday wear.
- Google's release button. On the Google Pixel Watch 5, you press the band release button on the back with the band and slide it into place. Google stresses checking that the button clicks into the correct position, so the watch cannot fall off. Small and large Active Bands come in the box.
- Pins and quick-release bars. Many sports watches use pin-fitted straps in standard widths. Garmin's QuickFit system makes swapping simple on the Garmin fēnix 9 Pro, which takes 22 mm QuickFit bands on the 47 mm size and 26 mm on the 51 mm. Several Garmin Forerunner models use industry-standard 20 mm or 22 mm quick-release bands instead, which opens up a wide choice of straps.
Samsung designs its own bands for the Galaxy Watch line. For the Samsung Galaxy Watch Ultra2, it offers a Marine Band, a PeakForm Band and a fabric Trail Band, and says the new band is 26 percent lighter thanks to an air pocket structure.
Choosing a material
Silicone and fluoroelastomer are the workhorses: comfortable in sweat and water, easy to clean, and the right choice for swimming and hard training.
Fabric and woven loops breathe well and adjust finely, which makes them good for sleep. Garmin's new ComfortFit fabric bands for the fēnix 9 series use a split weave that Garmin says combines stretch, softness and moisture resistance with QuickFit attachment.
Leather is the most beautiful choice and the most delicate. Apple notes that leather usually takes on a patina with wear, and can change color with exposure to perfume, insect repellent, oil, lotion or dyed materials such as denim. Leather bands are not water resistant, so take them off for workouts and swims. Our guide to leather that ages well covers the rest.
Metal bracelets and mesh look sharp with tailoring, but they are for everyday wear. Apple lists its Milanese Loop and Link Bracelet among the bands that are not water resistant, and Google says its leather and metal bands are meant for normal daily activity rather than high-intensity workouts.
Hermès. The Apple Watch Hermès Series 12 in radiant gold titanium comes with the Noir satin Clou de Selle band. Apple's care notes for Hermès bands are specific: rubber and woven bands are swimproof, while Hermès leather and knit bands are not water resistant.
Fit: comfort and accuracy
Apple's advice applies to any smartwatch: snug but comfortable, with room for your skin to breathe, worn just above the wrist bone. Tighten it a notch for workouts and loosen it afterwards. Google suggests moving the band two to three finger widths above the wrist bone during exercise. A band that is too tight can irritate skin; one that is too loose rubs, and can lose contact with the sensors.
Water resistance, honestly
Water ratings describe laboratory tests, not a promise for life.
| Watch | Maker's rating |
|---|---|
| Apple Watch Series 12 | 50 m under ISO 22810:2010: swimming and snorkeling, not scuba or high-speed water sports |
| Apple Watch Ultra 4 | 100 m under ISO 22810:2010, EN13319; recreational scuba to 40 m with a compatible app |
| Samsung Galaxy Watch Ultra2 | 10ATM, IP69K and EN13319 |
| Google Pixel Watch 5 | 5 ATM and IP68 |
| Garmin fēnix 9 Pro | 10 ATM |
Apple is candid that water resistance is not a permanent condition: it can diminish over time, and an Apple Watch cannot be rechecked or resealed. Apple advises avoiding drops, soapy water in the shower, perfume, solvents, sunscreen and lotions, as well as steam rooms. Garmin recommends rinsing thoroughly in fresh water after exposure to chlorine, salt water, sunscreen, cosmetics or alcohol, and avoiding pressing the buttons under water.
A cleaning routine that works
- Power down and unplug. Apple and Google both say to turn the watch off and take it off the charger before cleaning, and to remove a leather band first.
- Wipe, then rinse if needed. Use a soft, lint-free cloth lightly dampened with fresh water. For visible debris, Apple says you can hold the watch under lightly running warm fresh water.
- Skip the chemicals. No soaps or cleaning products on the watch itself, and no abrasives, compressed air, ultrasonic cleaners or hair dryers. Apple does allow 70 percent isopropyl alcohol wipes on the case and on sport, Solo Loop, Ocean and metal bands, but not on fabric or leather.
- Wash the band separately. Silicone and sport bands can take mild hypoallergenic soap and fresh water; Google recommends the same for its bands.
- Dry before charging. Garmin warns that even small amounts of sweat or moisture can corrode the charging contacts.
Clean the back regularly, too. Apple notes that a buildup of lotion or sunscreen on the back crystal can affect the sensors.
Glass, titanium and finish
Sapphire is the hardest common watch glass and resists scratches well; you will find it on the Ultra 4's flat front, the Series 12 in titanium and ceramic, and the fēnix 9 Pro. Titanium cases, on the Ultra 4, the Galaxy Watch Ultra2 and the fēnix 9 Pro, are light and strong. Apple does not recommend polishing or buffing an Apple Watch with abrasives, because it can change the finish.
For Apple Watch owners, a bedside stand with a watch charger built in keeps phone, earbuds and watch in one place; our charging and desk collection has several. For more on choosing the watch itself, see choosing a smartwatch that fits your life, and browse bands and watches in the wearables collection.