Audio-Technica AT-LPA2 Turntable: clear acrylic AT-LPA2 front three-quarter view with carbon tonearm, on white

Audio-Technica AT-LPA2 Turntable

Clear
$2,000.00
Skip to product information
Audio-Technica AT-LPA2 Turntable: clear acrylic AT-LPA2 front three-quarter view with carbon tonearm, on white

Audio-Technica AT-LPA2 Turntable

$2,000.00
ColorClear

Online ordering is paused. Questions about this piece? Ask our concierge.

The Audio-Technica AT-LPA2 is a fully manual belt-drive turntable in clear acrylic, with an AT-OC9XEN moving-coil cartridge fitted to an 8.8-inch straight carbon-fiber tonearm. Its motor controls and power supply sit in a separate unit, and it plays 33⅓ and 45 rpm into any phono input that accepts MC cartridges.

Acrylic is both the look and the engineering: a dense 30 mm chassis and 20 mm platter damp resonance, while an optical sensor under the spindle keeps the speed steady. Moving the motor electronics into the outboard control unit keeps electrical noise away from the tonearm, and a string-type anti-skate and two counterweights leave room for other cartridges later.

Highlights

  • Transparent 30 mm acrylic chassis and 20 mm acrylic platter
  • AT-OC9XEN moving-coil cartridge on an aluminum headshell, pre-mounted
  • 8.8-inch straight carbon-fiber tonearm with VTA adjustment
  • Separate control unit for power and speed
  • Optical speed monitoring for 33⅓ and 45 rpm

In the box

AT-LPA2 turntable with tonearm and cartridge, dust cover, control unit, 45 rpm adapter, RCA, control, ground and power cables, hex wrench and gloves.

Specifications

Type fully manual belt-drive turntable with separate control and power unit
Cartridge AT-OC9XEN moving-coil, nude elliptical stylus, PCOCC coils; pre-mounted on a machined aluminum headshell with azimuth adjustment
Tonearm 8.8-inch static-balanced straight carbon-fiber arm, VTA adjustable; effective length 223.6 mm, overhang 18.6 mm
Counterweights 110 g and 130 g (cartridges 6.1-9.2 g and 9.2-13.9 g)
Chassis 30 mm transparent acrylic with height-adjustable isolating feet
Platter 20 mm transparent acrylic, speed monitored by an optical sensor
Motor DC servo; speeds 33⅓ and 45 rpm
Wow and flutter <0.12%; signal-to-noise >60 dB
Phono stage not built in; connect to a phono input suited to MC cartridges
Outputs RCA, with a 1 m RCA cable and ground cable included
Dimensions (W x D x H) 420 x 340 x 135 mm (17 x 13 x 5.3 in)
Weight 8.4 kg (19 lb); control unit 1.1 kg (2.4 lb)
Power consumption 6 W
In the box dust cover, control unit, 45 rpm adapter, RCA, control, ground and power cables, hex wrench, gloves
Warranty 1 year limited

You may also like