Choosing premium earbuds: fit, sound and battery

|Elena Marsh
Sony WF-1000XM6: silver case and earbuds on a leather valet tray

Earbuds are the most personal thing we sell. They sit inside your ear for hours, they go everywhere with you, and two people can hear the same pair quite differently. A premium pair earns its place through three things working together: a fit that seals and stays comfortable, sound that is tuned with care, and a battery that fits your day.

Here is how to judge each one, with examples from the earbuds on our shelves.

Fit comes first

An in-ear design depends on its seal. When the tip closes the ear canal properly, bass sounds full, outside noise is blocked before any electronics get involved, and noise cancellation has far less work to do. When it does not, even an excellent earbud sounds thin and lets the world in. That is why fit, not driver size or codec, deserves your attention first.

Three practical points:

  • Try every tip size. It is tempting to stay with the tip that comes fitted, but many people need a different size, and your two ears do not have to match. The Bowers & Wilkins Pi8 comes with four sizes, from extra small to large; the Master & Dynamic MW09 includes five silicone sizes and two foam.
  • Consider foam. Foam tips compress and then expand to fill the ear canal, which suits people who never quite get a seal from silicone.
  • Look for fit aids. The Denon PerL Pro adds a foam tip and two Secure-Fit Wings to its four tip sizes, and has fit detection. The MW09's app includes a seal test that checks the fit for you.

Comfort over hours matters as much as the first five minutes. Wear a pair through a full album before you decide, and notice whether you want to take them out.

Bowers & Wilkins Pi8: man in profile wearing a Pi8 earbud, moody campaign portrait
Photograph: Bowers & Wilkins, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons

Sound: what actually makes the difference

Once the fit is right, sound comes down to the driver, the tuning, and how much the earbud adapts to you.

Drivers and tuning. Makers choose driver materials for stiffness and control. The Pi8 uses 12 mm carbon cone drivers, and the MW09 uses 11 mm beryllium drivers in aluminum and sapphire glass earbuds. Materials are part of the story, but the tuning around them decides whether you enjoy listening for hours.

Personalization. Some earbuds now adjust their sound to your hearing. The PerL Pro measures how your ears respond to sound and builds a custom listening profile from it. The Sennheiser Momentum True Wireless 5 takes a guided route, with prompt-based sound personalization and an eight-band EQ in Sennheiser's Smart Control Plus app.

Codecs. The Bluetooth codec decides how your music is packaged on its way from the phone. The Pi8, PerL Pro, Momentum True Wireless 5 and MW09 all support aptX Lossless, but only when the phone supports it too; iPhones connect over AAC. Our guide to Bluetooth codecs explains what each one changes.

Noise cancellation and awareness. All four of these wireless pairs use adaptive active noise cancellation, which adjusts to your surroundings. For the moments you need to hear the world, Denon offers Social Mode, Sennheiser a transparency mode, and the MW09 pairs three cancellation modes (Adaptive, All Day and Max) with Awareness, Voice and Natural listening modes.

Battery: reading the numbers honestly

Battery figures are quoted in different ways, so compare like with like.

A Kevlar Master & Dynamic MW09 charging case, its green charge lights on, resting on the back of a phone with both earbuds beside it
Photograph: Master & Dynamic, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons
  • Buds versus case. Makers usually give the earbuds' own runtime and a total that includes recharges from the case. Bowers & Wilkins quotes up to 6.5 hours for the Pi8 with noise cancellation on, plus 13.5 more from the case. Sennheiser quotes 12 hours per charge for the Momentum True Wireless 5 and up to 40 in total. Master & Dynamic quotes up to 16 hours for the MW09 and up to 48 with the case.
  • Noise cancellation costs power. Check whether a figure was measured with it on or off, and expect less from loud, cancelling, high-volume listening.
  • Quick charging matters on busy days. Bowers & Wilkins says 15 minutes in the Pi8's case gives two hours of playback; Master & Dynamic says five minutes gives the MW09 up to two hours.
  • Think about year three. Lithium-ion cells gradually lose capacity. The Momentum True Wireless 5 has a user-replaceable battery system, which Sennheiser says you can swap with a small screwdriver.

If you will not use a pair for a month or more, store it at about half charge rather than full or empty, as our care guide recommends.

The small things you will notice every day

  • Multipoint. The Pi8, PerL Pro, Momentum True Wireless 5 and MW09 can all stay connected to two devices, so a laptop call and phone music do not need re-pairing.
  • Water and dust. IP ratings tell you how well earbuds resist the elements: the first digit covers dust, the second water, and an X means the first was not rated. The Pi8, MW09 and Momentum True Wireless 5 earbuds are IP54; the PerL Pro is IPX4.
  • The case. It is the part you handle most. The MW09's case comes in Kevlar fiber or aluminum, and the Pi8's case doubles as a transmitter: plug it into a USB-C or 3.5 mm source, such as a seat-back screen, and it sends that audio to the earbuds.
Bowers & Wilkins Pi6: woman in a cap wearing Pi6, city at dusk
Photograph: Bowers & Wilkins, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons

And if you would rather go wired

True wireless earbuds are about freedom. In-ear monitors are about the last increment of fidelity, with no battery to charge or wear out. The Campfire Audio Andromeda 10 uses ten balanced armature drivers, four each for the lows and mids and two for the highs, in a machined aluminum housing. Its modular cable swaps between 3.5 mm, balanced 4.4 mm and a USB-C DAC termination, and it comes with foam, silicone and traction silicone tips in three sizes. Paired with a good portable source, it is a different experience altogether; see whether you need a DAC or headphone amplifier.

How to choose

  1. Decide where you will wear them most: commuting, flights, the gym or the office.
  2. Get the fit right, trying every tip, before judging the sound.
  3. Listen to music you know well, at the volume you actually use.
  4. Check that the codec and app features you want work with your phone.
  5. Compare battery figures on the same terms.

Because earbuds can only be returned with their packaging seal unbroken, for hygiene reasons, it is worth checking the ear-tip sizes and fit details on each product page before you choose. You can browse the full range in earbuds.

Header photograph: Sony, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons.