Sooner or later every serious headphone listener asks the same question: "Do I need an amp for these?" The honest answer is sometimes, and the deciding factors are your headphones and how you listen rather than the price tag. Before spending on electronics, it helps to know what a DAC and an amplifier actually do, and how to tell which one, if either, is holding you back.
Every device with a headphone socket already contains both. The question is whether the ones you have are equal to the headphones you plug in.
Two jobs, often in one box
A DAC, or digital-to-analog converter, turns the stream of numbers in a music file into a continuously varying electrical signal. A headphone amplifier takes that small signal and supplies the voltage and current needed to move the drivers in your headphones.
Your phone, laptop and streamer all have a DAC and a small amplifier inside, and so does a USB-C headphone adaptor. Dedicated units do the same two jobs with more care: cleaner power supplies, better isolation from the noisy electronics around them, and amplifiers with more voltage, more current, or both.
One important exception: Bluetooth headphones contain their own DAC and amplifier. Once the signal leaves your phone wirelessly, an external DAC plays no part, so if your listening is wireless, start with our guide to Bluetooth codecs instead.
What makes headphones hard to drive
Two specifications tell you most of what you need to know.
- Impedance, in ohms, describes how much the headphone resists the flow of current. High-impedance headphones need more voltage to reach a given level.
- Sensitivity describes how loud a headphone plays for a given input. Lower sensitivity means more power is needed for the same volume.
The Sennheiser HD 800 S is rated at 300 ohms, so it needs a source that can deliver a healthy voltage swing; a phone may play it, but rarely with authority. The Meze Audio ARTA is a more extreme case. Meze states that it requires powerful, high-voltage amplification, recommending at least 500 mW into its 225 ohms and noting that most portable players will not reach that.
At the other end of the scale, many earbuds and in-ear monitors are so sensitive that the problem reverses: a noisy source produces audible hiss. Here a cleaner DAC with a low output impedance helps more than extra power.
Symptoms and what they point to
| What you notice | The likely cause | What helps |
|---|---|---|
| Volume near maximum and still not loud enough | Not enough voltage | A headphone amplifier |
| Bass turns soft or loose as you turn it up; peaks sound strained | The amplifier running out of headroom | A more powerful amplifier |
| Hiss in quiet passages with sensitive earbuds | A noisy output stage | A quieter DAC/amp |
| Clicks or buzz when the computer works hard | Electrical interference inside the computer | An external USB DAC |
| You want to connect a TV, CD transport or streamer digitally | No suitable inputs | A DAC with optical or coaxial inputs |
If none of these describe your experience, you may not need anything at all. Spend the money on music, or on better headphones.
Portable: a DAC/amp in your pocket
For most listeners, a combined DAC and amplifier that connects to a phone or laptop is the sensible first step.
The Astell&Kern AK HB1 is the most flexible of the small ones. It works as a USB DAC over a cable, and also as a Bluetooth receiver that accepts LDAC and aptX HD, so wired headphones can go wireless. It offers a 3.5 mm output and a 4.4 mm balanced output.
The Chord Electronics Mojo 2 is built around a custom-coded FPGA, Chord's alternative to an off-the-shelf DAC chip. It has USB-C, optical and coaxial inputs, 3.5 mm and 4.4 mm outputs, and a digital tone control. Chord quotes 600 mW into 30 ohms and states support for headphones up to 800 ohms, which covers almost anything you are likely to own.
On the desk: transportable and dedicated
The Chord Electronics Hugo 2 is larger and battery powered, designed to move between desk and armchair. It adds aptX Bluetooth, a choice of four digital filters, a crossfeed function that softens the hard left-right separation of headphone listening, both 6.35 mm and 3.5 mm headphone outputs, and a line-level mode for feeding a hi-fi system.
If you already own a good DAC, or your streamer has one, the next step is amplification on its own, and for many listeners that amplifier also drives a pair of speakers. The McIntosh MA252 is a hybrid integrated amplifier: a vacuum tube preamplifier, using two 12AX7a and two 12AT7 tubes, ahead of a solid-state power amplifier. It has a 1/4-inch High Drive headphone output on the front, and because it is an all-analog design, with balanced and unbalanced line inputs and a moving-magnet phono input, it takes the analog output of your DAC or streamer.
Balanced outputs, briefly
A conventional headphone cable shares one return wire between the left and right channels. A balanced connection, usually a 4.4 mm plug or a 4-pin XLR, gives each channel its own pair of conductors, both actively driven by the amplifier. With demanding headphones, the practical benefit is often more available voltage. Use a balanced cable if both your headphones and amplifier support it, but do not buy new headphones for the sake of the socket.
A sensible order of upgrades
- Headphones first. They make the largest difference to the sound, and they determine what the electronics need to do.
- Check the specifications. Compare impedance, sensitivity and any power recommendation with what your current source can deliver. Our guide Planar magnetic headphones, explained covers why some planars need more than others.
- Add a DAC/amp if a symptom above applies. A portable unit solves most problems.
- Separate the DAC and amplifier only when you want a particular character, such as tubes, or more power than an all-in-one offers.
The surest test is your ears: play music you know well through your current source, then through a dedicated DAC or amplifier, and listen for what changes. You can browse our hi-fi components.
Header photograph: McIntosh, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons.