Spend any time around serious headphones and you will hear the word "planar" spoken with a certain reverence. Planar magnetic headphones sit at the top of many listeners' wish lists, and several of the most admired headphones we carry use them. But the reasons are rarely explained well, and the names for the technology vary by maker: orthodynamic, isodynamic, planar.
They all describe the same basic idea. Here is how it works, what it tends to do for the sound, and what it asks of you in return.
First, the conventional driver
Most headphones use a dynamic driver, a close cousin of the cone in a loudspeaker. A voice coil is attached to a diaphragm, usually a cone or dome, and sits in the gap of a single magnet. When the music signal flows through the coil, it moves back and forth and pushes the diaphragm with it.
The key point is that the force arrives in one place, where the coil joins the diaphragm, and the rest of the diaphragm has to follow. Designers work hard to make that diaphragm stiff and light so it moves as one piece. Done well, dynamic drivers sound wonderful, and some of the finest headphones in the world use them.
How a planar magnetic driver differs
A planar driver replaces the cone and coil with a very thin, flat film. Instead of a separate voice coil, a fine electrical conductor is laid across the surface of the film itself, in a pattern of traces. That film is suspended next to rows of bar magnets, on one side or on both.
When current flows through the traces, it interacts with the magnetic field across the whole surface at once. The film is driven more or less evenly over its entire area, rather than being pushed from one point. Because the diaphragm does not need to be rigid to move uniformly, it can be extraordinarily light.
Yamaha's description of its Orthodynamic driver captures the idea neatly: a thin-film diaphragm with metal coil patterning. Yamaha's first Orthodynamic headphones appeared in the 1970s, beginning with the HP-1, and the current Yamaha YH-5000SE is a redesigned, open-back flagship built around that technology, with a magnesium body.
What listeners tend to hear
Because the drive force is spread evenly and the moving mass is low, planar headphones are commonly associated with a few qualities:
- Low distortion, because the diaphragm moves as a whole rather than flexing.
- Controlled, extended bass that stays clean at higher listening levels.
- Quick, precise transients, the leading edge of a plucked string or a snare.
These are tendencies, not guarantees. Tuning, pads, enclosure and fit shape a headphone's sound as much as the driver principle does, and an excellent dynamic headphone will outperform an indifferent planar.
The trade-offs
Size and weight. Planar diaphragms are large, and the magnet arrays add mass. The Dan Clark Audio E3, a closed-back planar, weighs 455 grams. Planars are often heavier than dynamic designs of similar class, so headband design and clamping force matter.
Power. Many planars have low impedance but modest sensitivity, so they want current rather than voltage. The E3 is typical of the type, rated at 27 ohms with a sensitivity of about 90 dB/mW: an easy load in impedance terms, but one that rewards an amplifier with current in reserve. Others are deliberately demanding. The Meze Audio ARTA uses an unusual high-impedance planar driver, rated at 225 ohms, and Meze states plainly that it needs powerful, high-voltage amplification to sound its best.
Openness. Most planars are open-back, which means they leak sound and let the room in. Closed planars exist, but if you share your listening space, read Open-back or closed-back? before you choose.
Four makers, four approaches
Within the planar family there is plenty of room for invention, and the leading makers name their solutions.
Audeze builds its drivers around a Fluxor magnet array, its Uniforce diaphragm and Fazor phase management. The Audeze LCD-5s is an open-back flagship with a 90 mm transducer, a nano-scale Parallel Uniforce diaphragm and a chassis of carbon fiber, magnesium and acetate.
Meze Audio builds its planars around Rinaro drivers, which it calls Isodynamic Hybrid Array. The Meze Audio Empyrean II is an open-back with a large ovoid diaphragm and a 32-ohm impedance; the ARTA applies a high-impedance version of the same thinking.
Yamaha keeps its historic Orthodynamic name and focuses on refinement, including removing the fixed central structure found in conventional drivers.
HiFiMAN has made planar headphones its specialty, and the HiFiMAN Susvara Unveiled is its flagship planar model.
Planar versus electrostatic
Planars are sometimes confused with electrostatic headphones, which also use a thin film. The difference is the motor. An electrostatic diaphragm carries a high static charge and sits between two perforated plates that push and pull it; it needs a dedicated energizer or amplifier to work at all. A planar magnetic headphone uses ordinary magnets and plugs into a headphone amplifier like any other headphone.
Getting the best from a planar
- Check the power figures. Compare the maker's sensitivity and recommended power with what your amplifier can deliver. Our guide Do you need a DAC or a headphone amplifier? explains how to read them.
- Use the balanced cable if you have a balanced amplifier. Many planars ship with one, and balanced outputs often deliver more voltage.
- Give the fit time. Large cups and heavier frames settle differently from a lightweight dynamic. Adjust the headband before you judge the bass, which depends on the pad seal.
- Listen at your normal level. Planars are often praised for staying clean when played loud, but the point is how they sound at the level you actually use.
Compare the planar models we carry in audiophile headphones, and check each one's impedance and sensitivity before you choose an amplifier.