Building your first hi-fi system, piece by piece

|Theo Lindqvist
A white Bowers & Wilkins 607 S3 bookshelf speaker sits on an oak shelf among terracotta vases and ceramics, while a woman walks past in motion blur in warm afternoon light

A first hi-fi system is less a purchase than a set of decisions, and they are easier to make in the right order. Get the order wrong and it is easy to spend on the wrong box: a fine amplifier driving speakers that do not suit the room, or a turntable with nothing to plug it into.

This is the order we suggest to anyone who asks, from the room you listen in to the sources you play, with a few pieces from our hi-fi collection that show how each step fits together.

Step one: start with the room and the music

Before any equipment, answer three questions. How large is the room, and where can speakers actually go? What will you play most: streaming, vinyl, the TV, or all three? And do you want one tidy system, or separate components you can upgrade one at a time?

Those answers decide almost everything else. A small room with speakers on a sideboard needs a different approach from an open living space with room for stands. Our guide to bookshelf or floorstanding speakers covers sizing in more depth.

Step two: choose active or passive

There are two ways to build a system, and both are legitimate.

Active (powered) speakers Passive speakers and an amplifier
What you buy Speakers with the amplifiers built in Speakers, plus a separate amplifier
Set-up Fewer boxes and cables More pieces to place and connect
Upgrading Usually replaced as a whole Change one component at a time
Suits Smaller rooms, desks and minimal setups Listeners who want to grow a system over years

The Kanto TUK shows how complete an active system can be. Each speaker pairs an Air Motion Transformer tweeter with a 5.25-inch aluminum woofer, and the pair offers two RCA line-level inputs, optical and USB-C digital inputs, Bluetooth 5.4 with aptX Adaptive and a subwoofer output, with an infrared remote for volume, input and tone. Add a source and you are listening.

If you prefer separates, the rest of this guide is for you.

Step three: choose the speakers first

Speakers turn electrical signals back into moving air, and they interact with the room more than anything else in the chain. They shape the character of a system more than any other component, so choose them first and build around them.

For a first system in a typical living room, a good pair of bookshelf speakers on stands is hard to beat. The Bowers & Wilkins 607 S3 is a two-way design with a 25 mm titanium dome tweeter and a 130 mm Continuum cone bass/midrange driver, which Bowers & Wilkins describes as ideal for smaller spaces. Stands are sold separately, and they matter: they lift the tweeter to ear height and keep the cabinet off furniture that might resonate.

A pair of Oak Bowers & Wilkins 607 S3 speakers stand on a walnut sideboard either side of a black turntable and amplifier, as a woman reaches for the record under warm pendant lights
Photograph: Bowers & Wilkins, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons

Step four: match the amplifier to the speakers

An amplifier's job is to take a small signal and give it enough power to move the speaker drivers in control. Two numbers help you match one to your speakers.

  • Recommended power. Speaker makers publish a range. For the 607 S3, Bowers & Wilkins gives 30 to 100 watts into 8 ohms. An amplifier within that range will drive them comfortably.
  • Impedance. Speakers are rated in ohms, commonly 8 or 4. Lower impedance asks more current from the amplifier, so check that the amplifier is specified for your speakers' load.

More power is not the same as more volume all the time. Headroom simply means the amplifier is never strained on loud passages, which is when an underpowered amplifier begins to distort.

The Leak Stereo 230 is a natural partner for a first system because it gathers so much into one box. It is a class AB integrated amplifier rated at 75 watts per channel into 8 ohms, with a built-in ESS ES9038Q2M DAC, USB, optical and coaxial digital inputs, Bluetooth with aptX, an HDMI ARC connection for the TV, two analog inputs, a moving-magnet phono stage and a headphone output with its own dedicated amplifier circuit. It comes in walnut or silver.

A walnut-cased Leak Stereo 230 integrated amplifier with its brushed fascia, cream-faced knobs and remote control resting on top, lit against a dark background
Photograph: Leak, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons

Step five: add your sources

Streaming

Bluetooth from a phone is a fine place to start, and the Stereo 230 supports it. For full-quality streaming from services such as Qobuz, Tidal or Spotify, add a network streamer. The Bluesound NODE connects to your Wi-Fi or wired network, supports AirPlay 2, Spotify Connect, Tidal Connect, Qobuz Connect and Roon Ready, and connects to an amplifier through analog RCA outputs or, if you prefer to use the amplifier's own DAC, through optical, coaxial or USB digital outputs. Our guide to hi-res streaming at home explains the choices.

Vinyl

A turntable's cartridge produces a tiny signal that needs a phono stage to amplify it and restore the tonal balance used when records are cut. Some turntables and amplifiers include one; some do not. The Rega Planar 3, a belt-drive deck with a 12 mm float-glass platter and Rega's hand-assembled RB330 tonearm, does not, and it can be ordered with Rega's Nd3 or Nd5 moving-magnet cartridge fitted at the factory. That makes it a natural match for the Stereo 230's moving-magnet phono stage. Our guide to belt and direct-drive turntables covers the rest.

If you choose active speakers instead, check the inputs: the TUK's analog inputs are line-level, so pair it with a turntable that has a built-in phono stage, or add a separate one.

Close-up of a gloss-black Rega Planar 3 playing a record, the cartridge in the groove above the green-edged float-glass platter
Photograph: Rega, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons

Step six: set it up well

A carefully set-up modest system will often sound better than an expensive one placed badly. Three things matter most:

  • Placement. Form an equilateral triangle between the two speakers and your listening seat, and keep the speakers a little away from the wall behind them. Our speaker placement guide walks through it step by step.
  • Stands and supports. Rigid, level surfaces for speakers and turntable alike.
  • Sensible cables. Well-made speaker cable of a suitable gauge and secure connections; there is no need for exotic cable in a first system.

Leave room to grow

The advantage of separates is that a system can evolve. You might add a subwoofer for a large room, a dedicated DAC, or a better turntable as your record collection grows, and every step keeps the rest of the system in use. Browse our hi-fi components when you are ready for the next step.

The simplest way to make these decisions is to listen with music you know well, a few records or a playlist, and to notice the differences that matter to you.

Header photograph: Bowers & Wilkins, Manufacturer press image (product sold by SIGNAL), via Wikimedia Commons.