Rega Planar 3 Turntable
Online ordering is paused. Questions about this piece? Ask our concierge.
The Rega Planar 3 is a hand-built manual belt-drive turntable, supplied here with Rega's ND3 moving-magnet cartridge fitted at the factory. It pairs a 12 mm float-glass platter with the RB330 tonearm on a double-braced plinth, and connects to any amplifier with a moving-magnet phono input.
Every part is chosen for low mass and high stiffness: phenolic braces tie the arm mount to the brass main bearing, and a 24 V low-vibration motor drives the platter through Rega's EBLT belt. The plinth comes in gloss black, gloss white or a light oak-effect finish, with a clear dust cover as standard.
Highlights
- Rega ND3 moving-magnet cartridge, factory fitted
- RB330 tonearm with precision low-friction bearings
- 12 mm float-glass platter with a polished edge
- Double phenolic bracing between tonearm and bearing
- Ready for the optional Neo PSU for push-button speed change
In the box
Planar 3 turntable with RB330 tonearm and ND3 cartridge fitted, clear dust cover, quick start guide and plinth protectors.
Specifications
| Type | manual belt-drive turntable, hand built in England |
| Cartridge | Rega ND3 moving-magnet, factory fitted (this configuration) |
| Tonearm | hand-assembled Rega RB330 with low-capacitance phono cable and Neutrik RCA plugs |
| Platter | 12 mm float glass with polished edge |
| Motor | 24 V low-noise, low-vibration motor with EBLT drive belt |
| Speeds | 33⅓ and 45 rpm, changed by moving the belt on the pulley; push-button change with the optional Neo PSU |
| Plinth | high-gloss acrylic laminate (black or white) or light oak effect, with double phenolic braces |
| Phono stage | not built in; connect to a moving-magnet phono input |
| Dimensions (W x H x D) | 447 x 117 x 360 mm (17.6 x 4.6 x 14.2 in), lid closed |
| Weight | 6.0 kg (13.2 lb) |
| In the box | clear dust cover, quick start guide, plinth protectors |
| Warranty | 3 years (US); 1 year on the phono cartridge |